Every EZ Kit build ends the same way: you, a torch, and a seam waiting to be joined. This 1 lb. roll of silver solder is what holds that work together.
It's designed for strong, reliable joints on copper, especially seams, fittings, and connections where durability and clean flow count. Used with proper flux, it flows smoothly into the joint and makes strong, long-lasting bonds.
Why Solder Matters So Much
Any alchemist will tell you the bond is the experiment. On a copper still, every soldered seam has to hold up to heat and vapor, run after run. A dependable solder that flows clean lets you focus on technique: clean copper, good flux, steady heat, and patience while the joint fills.
Made for Builders and Fixers
- Assembling a 50, 60, or 100 gallon EZ Kit
- Making the final cone-to-pot joint on a Majority Soldered still
- Repairing or reworking copper components
- General copper fabrication in your shop
The roll gives you a full pound on hand, so you won't run out halfway through a build. It's priced at $79.
Work Safely, Distill Legally
Solder in a well-ventilated space and follow the safety directions for your torch and flux. If you plan to use your finished still for spirits, remember that distilling alcohol requires federal (TTB) permits. Follow federal, state, and local law. Questions? Call 603-997-6786.
